Xerox WorkCentre 3025NI - Page 128

June 2014
6-16
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
GP 6
General Procedures and Information
GP 6 Machine Settings
Purpose
Use this procedure to configure machine settings from the Control Panel, Easy Print Manager,
and CWIS.
Procedure
From the Conrol Panel
1. Press the <Information> button.
2. Use the up/down arrows to scroll to the following menu items:
• Feature Default
• Fax Setup
• System Setup
•Network
To change settings Using Easy Print Manager (EPM):
1. Connect to the WorkCentre® 3025 Printer with a USB cable.
2. Open Easy Print Manager from the PWS.
3. Select [Advanced Mode] then select [Machine Settings].
4. Select from the following menu items to change the machine settings.
• System
• Earth Smart
• Input Tray
• Layout
• Printer
•Emulation
• Copy
•Fax
•Scan
• Network Setttings
From CWIS:
1. Connect to the WorkCentre® 3025 Printer with a USB cable or wirelessly.
2. Open Easy Print Manager and select the [CWIS] icon.
3. Login in to CWIS. Username: (Admin) Password: (1111)
NOTE: It may be necessary to obtain the username and password from the customer if
they have been changed.
4. Select [Properties] then select from the following menu items to change the machine set-
tings:
•Firmware
• System
• Printer
• Copy
•Fax
•Scan
• E-mail Notification
• Network Settings
• Security