22
Setting the Display Language
Use this option to change the language displayed on the Control Panel.
¾ Select [Machine Setup] using the Navigation Keys and press [Enter].
¾ Select [Language] using the Navigation Keys and press [Enter].
The Current Language setting will appear on the display.
¾ Select the Language required using the Navigation Keys and press
[Enter] to save the selection.
¾ Press [Menu/Exit] to exit each menu level and return to standby mode.
1
¾ Press the [Machine Status]
key on the Control Panel.
Enter Machine
Status
2
3
4
5
quick_use.book Page 22 Thursday, March 2, 2006 9:38 AM
To Next Page
Loading...
