Xerox WorkCentre 4118

17
Test Print
To ensure the WorkCentre 4118 has been installed correctly a test print or
scan should be submitted from the Workstation.
¾ Open a document on the Workstation.
¾ Select the Xerox WorkCentre 4118 as the printer to which the document
will be sent.
¾ Print the selected document on the device and verify that it prints
correctly. The installation process is now complete.
6
¾ The confirmation screen summarizes
your selections. Either Click [Back] to
reselect or Click [Next] to install your
selections.
7
¾ Click [Finish].
The driver installation is now
complete.
)
Instructions for installing a USB driver in Windows 98 or Me can be found in the Xerox
WorkCentre 4118 User Guide, or at www.xerox.com.
1
2
3
quick_use.book Page 17 Thursday, March 2, 2006 9:38 AM