Xerox WorkCentre 4118

25
Enabling a Confirmation Page
¾ Press [Machine Status] on the Control Panel.
¾ Using the Navigation Keys, select [Fax Setup] and press [Enter].
¾ Using the Navigation Keys select [MSG Confirm] and press [Enter].
¾ Using the Navigation Keys select [ON] and press [Enter].
A confirmation page will print after each Fax transmission.
Sending a Fax
3
4
¾ Load an original into the
Document Feeder or place
face-down on the Document
Glass.
¾ Press the [Fax] key to
activate Fax mode.
¾ Enter the destination fax
number using the Numeric
Keypad on the machine.
¾ Press Start to send the fax.
or
Lighten/
Darken
Original Type
2 Sided
Color
Original
Resolution
Fax Key
¾ Load an original into the Document Feeder or place face-down on the
Document Glass.
¾ Press the [Fax] key to activate Fax mode.
¾ Press the [Manual Dial] key and listen for the dial tone.
¾ Use the telephone keypad to enter the destination fax number.
¾ Press Start when you hear the high-pitched fax signal.
quick_use.book Page 25 Thursday, March 2, 2006 9:38 AM