Xerox WorkCentre 4118 Quick Use Guide

29
ControlCentre
ControlCentre is software available for the WorkCentre 4118 which enables
Fax and Printer options and features to be setup and viewed remotely using
a PC. After setting up options, simply click [Apply] on the ControlCentre
screen to download the new settings to the machine.
The ControlCentre utility can be installed at the same time as the other
drivers using the software CD supplied with your machine. Use the following
instructions to run and use ControlCentre:
¾ Start the Windows software.
¾ From Programs select [Xerox WorkCentre 4118], then [ControlCentre].
1
2
¾ Use the [Phonebook] tab to create and
edit phonebook entries for use with Fax
(4 in 1 only).
3
¾ Click on the [Firmware Update] tab to
update the firmware of the machine.
For further information, please refer to the
User Guide.
quick_use.book Page 29 Thursday, March 2, 2006 9:38 AM

Xerox WorkCentre 4118 Specifications

General

Print Technology	Laser
Print Speed	18 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	18 cpm
Max Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Memory (Standard)	64 MB
Connectivity	USB 2.0
Supported Operating Systems	Windows, Mac