3 Loading Paper
46
4.
Slide the paper guides towards the
front and back of the tray.
5.
Slide the paper guide to the right.
6.
Load the paper neatly and tightly
against the left corner of the tray, with
the side to be printed facing up.
NOTE: Do not load mixed types or mixed
sizes of paper together in Tray 1.
NOTE: Do not load paper above the
maximum fill line as it may cause a paper
jam or a machine malfunction.
7.
Adjust the paper guides to just touch
the edges of the paper, and align the
arrow on the right paper guide with the
appropriate paper size marking on the
label.
NOTE: If you do not adjust the paper
guides correctly, it may result in a paper
jam.
NOTE: If loading a relatively thin stack of
paper in the tray, when tightly adjusting the
right paper guide up against the edge of the paper, the stack of paper can become
warped. This will not result in a paper jam as long as the paper guide arrow is correctly
aligned with the appropriate paper size marking on the label.
8.
Push Tray 1 gently back into position.
9.
Specify the paper size and orientation on the Control Panel.
For information on how to specify the paper size and paper orientation, refer to
Specifying the Size and Orientation of Paper Loaded in the Trays on page 48
.
To Next Page
Loading...
