Xerox WorkCentre 5020DN User Manual

Control Panel
31
When the paper size table is inches
11 x 17” SEF, 8.5 x 14” SEF, 8.5 x 13.4” SEF, 8.5 x 13” SEF
Select this option if the size and orientation of an original document is
11 x 17” SEF, 8.5 x 14” SEF, 8.5 x 13.4" SEF, or 8.5 x 13” SEF when
using the N-up feature.
8.5 x 11” SEF
Select this option if the size and orientation of an original document is
8.5 x 11” SEF.
8.5 x 11” LEF
Select this option if the size and orientation of an original document is
8.5 x 11” LEF.
When the paper size table is metric
A3 SEF, B4 SEF
Select this option if the size and orientation of an original document is
A3 SEF or B4 SEF.
A4 SEF, B5 SEF
Select this option if the size and orientation of an original document is
A4 SEF or B5 SEF.
A4 LEF, B5 LEF
Select this option if the size and orientation of an original document is
A4 LEF or B5 LEF.
<N-up/ID Card Copy> button
Press this button to select the N-up feature
or ID Card Copy feature.
NOTE: When the N-up feature is selected,
the zoom ratio is fixed to Auto%, and it
cannot be changed manually.
ID Card Copy
Copies an ID card-shaped document onto one side of a single sheet.
For more information on the ID Card Copy feature, refer to
ID Card
Copies (Copying an ID Card-shaped Document onto a Sheet) on
page 66
.
4-up
Copies four pages of the original documents onto one side of a single
sheet.
For more information on the N-up feature, refer to
4-up/2-up Copies
(Copying Multiple Pages onto a Single Sheet) on page 56
.
2-up
Copies two pages of the original documents onto one side of a single
sheet.
For more information on the N-up feature, refer to
4-up/2-up Copies
(Copying Multiple Pages onto a Single Sheet) on page 56
.
<N-up/ID Card Copy>
button

Xerox WorkCentre 5020DN Specifications

General

Brand	Xerox
Model	WorkCentre 5020DN
Category	All in One Printer
Language	English