NOTE
When determining the PSUs, ensure
that the rated power of the PSUs is
greater than that of the server.
5.2.3 Processor
⚫
The server supports one or two processors.
⚫
If only one processor is required, install it in socket CPU1.
⚫
Processors of the same model must be used in a server.
⚫
Contact your local sales representative or see "Search Parts" in the Compatibility
Checker to determine the components to be used.
Figure 5-119 Positions of processors
5.2.4 Memory
5.2.4.1 DDR4 Memory
5.2.4.1.1 Memory ID
You can determine the memory module properties based on the label attached to the memory
module.
To Next Page
Loading...
Need help?
General
