FusionServer 2288H V6 Server
Technical White Paper
⚫
6 months in unpacked/packed and powered-off state
⚫
The maximum preservation duration is determined according to the preservation specifications
provided by drive vendors. For details, see the manuals provided by drive vendors.
6.2.3 Physical Specifications
Table 6-6 Physical specifications
⚫
Chassis with 3.5" drives: 86.1 mm x 447 mm x 790 mm
(3.39 in. x 17.60 in. x 31.10 in.)
⚫
Chassis with 2.5" drives: 86.1 mm x 447 mm x 790 mm
(3.39 in. x 17.60 in. x 31.10 in.)
Figure 6-2 Physical dimensions (example: 3.5" drive chassis)
NOTE
⚫
See Figure 6-2 for methods in measuring physical dimensions of
the chassis.
⚫
Methods measuring 3.5" and 2.5" drive chassis are the same. The
3.5" drive chassis is used as an example.
⚫
Requirements for cabinet installation:
Cabinet compliant with the International Electrotechnical
Commission (IEC) 297 standard
− Cabinet width: 482.6 mm (19.00 in.)
− Cabinet depth ≥ 1000 mm (39.37 in.)
⚫
Requirements for guide rail installation:
− L-shaped guide rails: apply only to our company's
cabinets.
− Static rail kit: applies to cabinets with a distance of
543.5 mm to 848.5 mm (21.40 in. to 33.41 in.) between
the front and rear mounting bars.
To Next Page
Loading...
