PSUs as required.
NOTE
When determining the PSUs, ensure
that the rated power of the PSUs is
greater than that of the server.
5.1.3 Processors
⚫
The server supports one or two processors.
⚫
If only one processor is required, install it in socket CPU1.
⚫
Processors of the same model must be used in a server.
⚫
Contact your local sales representative or see "Search Parts" in the Compatibility
Checker to determine the components to be used.
Figure 5-27 Processor positions
5.1.4 Memory
5.1.4.1 DDR4 Memory
5.1.4.1.1 Memory ID
You can determine the memory module properties based on the label attached to the memory
module.
To Next Page
Loading...
