xFusion Digital Technologies FusionServer 2288H V6

FusionServer 2288H V6 Server
Technical White Paper
A Appendix
2022-06-25
237
Configurat
ion
Maximum
Operating
Temperatu
re 30°C
(86°F)
Maximum
Operating
Temperatu
re 35°C
(95°F)
Maximum
Operating
Temperatu
re 40°C
(104°F)
Maximum
Operating
Temperatu
re 45°C
(113°F)
Maximum
Operating
Temperatu
re 50°C
(122°F)
modules
whose
capacity
is 128
GB per
module
or larger
are not
supporte
d.
⚫
When a single fan is faulty, the highest operating temperature is 5°C (9°F) lower than the rated
value.
⚫
When a single fan is faulty, the system performance may be affected.
⚫
When the 6342/6348/8351N/8358/8358P/8360Y/8362/8368/8380 processors are configured, I/O
modules 1, 2, and 3 do not support Tesla T4 GPU cards, and I/O module 3 does not support HDDs.
⚫
In 12 x 3.5" drives pass-through configuration and 12 x 3.5" drives EXP configuration, the processor
TDP is required to be no more than 205 W and the total capacity of DIMMs configured no more than
2048 GB when IO module 3 is configured with 4 x 2.5" NVMe drives module.
⚫
It is recommended that servers be deployed at an interval of 1U to reduce server noise and improve
server energy efficiency.
⚫
8368Q 38c 270 W 2.6 GHz liquid-cooled processors are not supported.
⚫
When the ring temperature is 50°C (122°F), the CPU heat sink must be configured with a 2 U heat
pipe heat sink.
A.3.2 2288H V6-16DIMM
Table A-7 Operating temperature limitations
Configuration
Maximum
Operating
Temperature
30°C (86°F)
Maximum
Operating
Temperature
35°C (95°F)
Maximum
Operating
Temperature
40°C (104°F)
Maximum
Operating
Temperature
45°C (113°F)
8 x 2.5-inch
drive
pass-through
configuration
⚫
All options
supported.
⚫
All options
supported.
⚫
Rear drives
(including
HDD/SSD/P
CIe
SSD/NVMe
SSD/M.2)
are not
supported.
⚫
T4 GPU
cards are not
⚫
Only
4309Y/4310
/4310T/4314
/4316/5315
Y/5317/531
8N/5318S/5
318Y/5320T
/6338T
processors
are
supported.