FMC XM105 Debug Card User Guide www.xilinx.com 7
UG537 (v1.2) September 24, 2010
Chapter 1
XM105
Overview
This document describes the FPGA Mezzanine Card (FMC) debug mezzanine card (HW-
FMC-XM105-G), referred to as the XM105 in this guide. A Quick Start section and Board
Technical Description are combined within this document.
Related Xilinx Documents
Prior to using the XM105 users should be familiar with Xilinx resources. See the following
locations for additional documentation on Xilinx tools and solutions:
•ISE: www.xilinx.com/ise
• Answer Browser: www.xilinx.com/support
• Intellectual Property: www.xilinx.com/ipcenter
The XM105 must be used in conjunction with a Xilinx board. Documentation for Xilinx
boards is available at the following locations:
•SP601: www.xilinx.com/sp601
•SP605: www.xilinx.com/sp605
• ML605: www.xilinx.com/ml605
Downloaded from Elcodis.com electronic components distributor