FMC XM105 Debug Card User Guide www.xilinx.com 13
UG537 (v1.2) September 24, 2010
Board Technical Description
1. VITA 57.1 FMC HPC Connector J17
This connector provides the interface to the board containing the Xilinx FPGA. The XM105
uses Samtec FMC HPC connector part number ASP-134488-01. The XM105 connector
mates with a FMC LPC connector or an FMC HPC connector on Xilinx boards.
Table 1-3 shows the VITA 57.1 FMC HPC pin assignments, associated schematic signal
names, and XM105 header or connector to which the signal is wired. Pins labeled as
no connect are not used on the XM105. Board FPGA signals are wired to various headers
and connectors on the XM105. Subsequent sections define each connector, including a
connection table showing FMC HPC to breakout connector wiring. Xilinx boards listed in
Table 1-3 provide fixed 2.5V power to VADJ pins of the FMC HPC connector.
Table 1-3: VITA 57.1 FMC HPC Connections
FMC
HPC Pin
Schematic Net
Name
Breakout
Signal to
Connector
FMC
HPC Pin
Schematic Net
Name
Breakout
Signal to
Connector
A2
No connect Not Used
B1
No connect Not Used
A3 B4
A6 B5
A7 B8
A10 B9
A11 B12
A14 B13
A15 B16
A18 B17
A19 B20
A22 B21
A23 B24
A26 B25
A27 B28
A30 B29
A31 B32
A34 B33
A35 B36
A38 B37
A39 B40
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
