148 MicroBlaze Development Kit Spartan-3E 1600 Edition User Guide
www.xilinx.com UG257 (v1.1) December 5, 2007
Appendix A: Schematics
R
Power Supply Decoupling
IC10PWR represents the various voltage supply inputs to the FPGA and shows the power
decoupling network.
Jumper JP9 defines the voltage applied to VCCO on I/O Bank 0. The default setting is 3.3V.
See “Voltage Control,” page 20 and “Voltage Supplies to the Connector,” page 116 for
additional details.
To Next Page
Loading...
