Xilinx MIcroBlaze Development Spartan-3E 1600E Kit

34 MicroBlaze Development Kit Spartan-3E 1600 Edition User Guide
www.xilinx.com UG257 (v1.1) December 5, 2007
Chapter 4: FPGA Configuration Options
R
The Spartan-3E Starter Kit board has an XCF04S Platform Flash PROM. Select xcf04s
from the drop list, as shown in Figure 4-16. Click Add, then click Next >.
The PROM Formatter then echoes the settings, as shown in Figure 4-17. Click Finish.
Figure 4-16: Choose the XCF04S Platform Flash PROM
Figure 4-17: Click Finish after Entering PROM Formatter Settings
UG257_4-16_061206
UG257_4-17_061206