Ambient Temperature: 0~50 ℃
Humidity: 90%RH or less
Vibration: 4.9m/s
2
Condensation and Freezing: None
Ambient Temperature for Long-term Reliability: 50°C maximum
2-2.Servo motor installation
MS series servo motors can be installed either horizontally or vertically. The service life of the
servo motor can be shortened or unexpected problems might occur if it is installed incorrectly
or in an inappropriate location. Follow these installation instructions carefully.
1. The end of the motor shaft is coated with antirust. Before installing, carefully remove all
of the paint using a cloth moistened with paint thinner.
2. Avoid getting thinner on other parts of the servo motor.
2-2-1. Installation environment
Free of corrosive or explosive gases
Please choose oil seal motor in the environment with grinding fluid, oil mist, iron
powder, cutting, ect
Away from the heating source such as stove
To Next Page
Loading...
