Xinje DS5C Series

32
4-1-3. FX-XX auxiliary function
 F0-XX
Function No.
Description
F0-00
Clean the alarm
F0-01
Back to out of factory settings
F0-02
Clean the offset
1. Clean the alarm (F0-00)
Set F0-00=1 to reset the alarm. When the alarm occurred, please find out the alarm reasons
then clean the alarm.
2. Back to out of factory settings (F0-01)
Please power off the servo drive before the operation.
Set F0-01=1, then press ENTER. No need to re-power the servo drive.
3. Clean the offset (F0-02)
Set F0-02=1 to clean the offset.
 F1-XX
Function code
Explanation
F1-00
Jog run
F1-01
Test run
F1-02
Current sampling zero calibration
F1-05
Panel enable
F1-06
Absolute encoder clear number of
turns