Xinje DS5C Series User Manual

84
sampling time
04
Xnet slave station
data
—
15
1~500
○
All
05
Xnet slave station
numbers
—
10
1~256
○
All
06
Communication
overtime retry times
time
10
1~500
○
All
07
Fieldbus command
update period
1us
3000
1~65535
○
All
10
RS232 station no.
—
1
1~255
○
All
11
RS232 parameter
—
2206
Parameter same to
P7-01
○
All
20
Back to zero
direction (fieldbus)
—
1
-9999~9999
○
All
Note: the positive and negative value means the direction of back to zero, positive
value means finding origin in forward direction, negative value means find origin in
reverse direction, absolute value means finding Z phase numbers when backing to
zero.
21
Filter time after
backing to
zero(fieldbus)
0.25ms
400
1~65535
○
All
Note: after find the zero position, back to position mode and there is no position offset,
the back to zero process is completed after keeping the time of this parameter, then
send back to zero complete flag to PLC.

Xinje DS5C Series Specifications

General

Brand	Xinje
Model	DS5C Series
Category	Servo Drives
Language	English