Xtrails ADPRO iFT - Chapter 14: Power Consumption Details

iFT Series Hardware Installation Manual ADPRO
60 27817_05
14 Power Consumption
Theestimatedpowerconsumptiondependsontheinstalledcomponentsandonthesystemload:
Motherboard 12W
Processor 65Wmax.
SeagateSV35harddisk 10W
MIOcard 1W
Examplefora2-diskdevice(withmaximumvalues):
Motherboard 13W
Processor 65W(PH10LUwithCorei7/4770-Smicroprocessor)
2SeagateSV35harddisks 20W
MIOcard 1W
TOTAL 
onsecondarycircuit: 100W
onprimarycircuit:
(totalpowerconsumptiondividedby0.78–
thisistheefficiencyofthepowersupply)
128W(0.56A/230VAC)
Note
MeasurementonaniFT-E*device(withPH10LUmotherboardandi7microprocessor)producedthe
followingresults:0.2Aat230VAC→46W(idlestate).
(*)configuration=iFT-Ewith2harddisks(4TBperdisk).