Xtralis VESDA ECO - Product Overview

Product Guide
VESDA ECO Detector by Xtralis
2 Overview
Product Overview
A Enclosure Cover H USB Connection
B Enclosure Cover Latch I
microSD Card location
C Sensor Cartridge J Status Indicators
D Sensor Cartridge Label K Gas Test Port
E Enclosure Body L
Flow indication Arrow
F Main Product Label M
Cable Entry
G Enclosure Cover Hinge N
Calibration Label
Figure 1 – ECO Detector Layout
To ensure correct application of the VESDA ECO gas detector it should
be fitted and commissioned by Xtralis trained and accredited distributors /
installers only.
The VESDA ECO gas detector has been designed and ap
proved for use with
compatible Xtralis manufactured aspirating systems
only. The VESDA ECO
product warranty will be invalidated if attached to any 3
rd
party
aspirating
The use of 3
rd
party gas detection as part of an Xtralis
aspirating
network will invalidate the Xtralis product approvals and warranty.
VESDA ECO Detector by Xtralis
17898_05
microSD Card location
Flow indication Arrow
To ensure correct application of the VESDA ECO gas detector it should
be fitted and commissioned by Xtralis trained and accredited distributors /
proved for use with
only. The VESDA ECO
aspirating
product.
aspirating
sample pipe
network will invalidate the Xtralis product approvals and warranty.