Xtralis VESDA VLI - Accessories

VESDA VLI Product Guide VESDA by Xtralis
14 www.xtralis.com
2.8 Accessories
A range of optional accessories are available to augment the VLI detector.
2.8.1 LCD Programmer
The VESDA LCD Programmer is used for configuring, commissioning and maintenance of the
devices on VESDAnet. It is connected via VESDAnet and can be mounted at a remote location.
A hand-held model (VHH-100) is also available. This model is connected to a DB9 socket on the
optional VESDAnet expansion card (refer to section 2.7.1).
Legend
A LCDDisplay
B Keys
Figure 2-7: Hand-held LCD Programmer
Refer to the LCD Programmer Product Guide for further details.
2.8.2 Remote Display Module
The Remote Display Module provides real-time indication of the status of a VLI detector and a single
zone.
Figure 2-8: Remote Display Module
The unit contains a 20-segment vertical bar graph display, a 2 digit numeric display, an audible
sounder, clear alarm and fault indicators, and can be mounted in a remote mounting box or 19 inch
subrack.