VESDA by Xtralis VESDA VLI Product Guide
www.xtralis.com 31
3.6 Preliminary System Check
A preliminary system check is required after installing the VLI detector, before it is commissioned for
use. The check can be conducted by connecting the detector to a LCD Programmer or using the
Xtralis VSC software. The preliminary systems check includes:
l For networked detectors, conducting a communications check .
l Configure the "pipes in use" setting.
l Normalizing the air flow.
l Conducting a basic pass/fail smoke test.
For details on preliminary systems check refer to the LCD Programmer or the relevant software
documentation.
Refer to the LCD Programmer and Commissioning Guides for further details.
To Next Page
Loading...
