VESDA by Xtralis VESDA VLI Product Guide
www.xtralis.com 17
3 Installation
The VLI detector is shipped with all the components necessary for installation with the exception of
pipe and associated materials.
Components include:
l 1 VLI detector
l 1 Mounting bracket.
l 1 End of Line resistor with units factory fitted with VESDAnet Card
l Multilingual Installation Sheet
l this Product Guide
Check all components for damage and refer any concerns to your authorized representative.
Additional Requirements
Depending on the nature of the installation, it may be necessary to acquire the following items:
l Screws and inserts for the mounting bracket appropriate for the installation location
l USBInterface Lead if configuration of the detector is to be done via the USBinterface
Figure 3-1: Type A to Type B USBInterface Lead
To Next Page
Loading...
