6.8.11 Set up a modem....................................................................................................... 30
6.8.12 Set up a MAS network overview............................................................................. 31
6.8.13 Set up a MAS relay module.....................................................................................31
6.9 Operator panel settings....................................................................................................32
6.9.1 Change the language................................................................................................ 32
6.9.2 Log in and change the password............................................................................. 32
6.9.3 Set the date, time, unit, and MAS id.........................................................................33
6.9.4 Get the sensor information from the pump memory.............................................33
6.9.5 Set up a monitoring channel..................................................................................... 34
6.9.6 Record the run time and number of starts...............................................................34
6.9.7 Check and change the IP address............................................................................ 35
7 Operation.................................................................................................................................. 36
7.1 Alarm levels and handling................................................................................................ 36
7.2 Web tool operations..........................................................................................................36
7.2.1 View the status and measurement results............................................................... 36
7.2.2 View the trend diagrams............................................................................................37
7.2.3 View the alarm and event log....................................................................................37
7.2.4 Acknowledge all active alarms..................................................................................38
7.2.5 View the running statistics......................................................................................... 38
7.2.6 View a monitoring channel........................................................................................39
7.2.7 View the pump information.......................................................................................39
7.2.8 View the data from other units on the same network............................................ 40
7.2.9 Backup all the parameters.........................................................................................40
7.2.10 Restore all the parameters with ftp........................................................................ 41
7.2.11 Restore all the parameters with the backup and restore function..................... 41
7.2.12 Edit and upload the selected parameters.............................................................42
7.2.13 Enter the data plate text into the base unit and pump memory........................ 42
7.2.14 Save all the measurement data for view in Microsoft Excel
®
.............................. 43
7.2.15 Save all the measurement data to restore the system.........................................44
7.2.16 Upload all the measurement data to a system..................................................... 44
7.2.17 Delete all the measurement data in a system.......................................................45
7.2.18 Edit the data plate information............................................................................... 46
7.2.19 Edit the service log...................................................................................................46
7.2.20 Set the service interval............................................................................................. 46
7.2.21 Copy all the data from the pump memory to the base unit................................47
7.2.22 Copy all the data from the base unit to the pump memory................................47
7.3 Operator panel operations...............................................................................................47
7.3.1 View the status and readings for a channel.............................................................47
7.3.2 View the alarms........................................................................................................... 48
7.3.3 View the pump run time and reset the counter...................................................... 48
7.3.4 View the number of pump starts and reset the counter........................................ 48
7.3.5 View the pump start and stop times.........................................................................48
7.3.6 View the pump information.......................................................................................49
7.3.7 View the status of the digital ports........................................................................... 49
7.3.8 View the data from the power analyzer................................................................... 49
7.3.9 Set the service interval............................................................................................... 49
7.3.10 Copy all the data from the pump memory to the base unit................................50
7.3.11 Copy all the data from the base unit to the pump memory................................50
8 Maintenance..............................................................................................................................51
8.1 Update the internal software............................................................................................51
9 Troubleshooting....................................................................................................................... 52
9.1 Common problems........................................................................................................... 52
9.2 Event messages................................................................................................................. 53
Table of Contents
2 MAS 711 Installation, Operation, and Maintenance Manual
To Next Page
Loading...
Need help?
General
