2. Enter the IP address, User name, and Password in the MAS update dialog box.
3. Click the Filename browse button.
4. Select the database file to upload.
5. Select Database under Area to update.
6. Click Upload.
The database loads into the base unit. The unit restarts which take a couple of minutes.
7.2.17 Delete all the measurement data in a system
1. Click Setup > Data log.
2. Select All in the Select data log drop-down menu.
3. Click Clear.
A dialog box appears with a warning that all the data will be lost.
4. Click OK.
5. Click Setup > Running statistics.
6. Click Reset ALL.
7 Operation
MAS 711 Installation, Operation, and Maintenance Manual 45
To Next Page
Loading...
