1. Fuel tank
2. Fuel fill
3. Fuel gauge
4. Record the measurement.
The height of the sensor blade of the fuel level transducer must be slightly
smaller than the depth of the tank.
5. To determine the height of the sensor blade, subtract 31.75 mm (1.25 in)
from the recorded measurement.
1. Fuel level transducer
2. Height of the sensor blade
6. Use the result from the step 5 to select a fuel level transducer from the
following list.
Fuel level transducer Godwin part number
14.5" 1‐1/2" NTP resistive fuel level transducer ACT‐10897
13.5" 1‐1/2" NTP resistive fuel level transducer ACT‐10898
4 Electrical Installation
20 FST Installation, Operation, and Maintenance Manual
To Next Page
Loading...
