63
SW 838023
EN 2.10 Shuttle Manual 1712
Appendix
System alarm delay
Enter the access code (see page 58) and press 'E':
Shuttle
®
will give a system alarm (see page 32), if an accept-
able echo has not been present within a preset period of
time.
If it is very important to know that the level measurement is
valid at all times, the delay should eventually be decreased.
Use the arrow keys to select a new value:
Confirm the new setting:
The actual setting is shown immediately:
(Value in seconds.)
Shuttle
®
is ready for a new selection of a password protect-
ed menu after pressing 'Enter'.
(Re-entering the access code is not necessary if a menu
selection is made within 5 minutes.)
Press 'Escape' if no further password protected menu
selections are needed …
... or confirm with 'Enter' that the changes should be saved,
whereupon Shuttle
®
revert to normal read-out, and the next
password protected menu can be selected.
(Press 'Escape' if the changes should not be saved.)
To Next Page
Loading...
