Xylem wtw Multi 3410 - Page 25

Operation Multi 3410
25
ba75863y18 01/2015
Changing the password If the administrator has set up the access with password protection:
Forgotten the
password?
Contact the administrator.
1 Switch on the meter with <On/Off> (or <On/Off_>).
The Login dialog box appears.
2 Using <><>, enter the User name menu item and confirm
with <MENU/ENTER>.
The user name is highlighted.
3 Using <><>, select a user name and confirm with <MENU/
ENTER>.
4 Using <><>, enter the Change password menu item and
confirm with <MENU/ENTER>.
5 Enter the old password in the Password box with <><>
and <><> and confirm with <MENU/ENTER>.
6 Enter the new password in the New password box with
<><> and <><> and confirm with <MENU/ENTER>.
The password is changed.
The login takes place. If a sensor is connected the measured
value display appears.