To Next Page

To Previous Page

Multi 3410 Operation

ba75863y18 01/2015

4.11.1 Manual storage

You can transmit a measurement dataset to the data storage as fol-

lows. The dataset is at the same time output to the interface:

If the storage is full When all storage locations are occupied, it is not possible to continue

storing. Then you can e.g. transmit the stored data to a PC or a USB

flash drive (see section 4.11.3) and subsequently erase the storage

(see section 4.11.4).

4.11.2 Automatic storage at intervals

The storage interval (Interval) determines the time interval between

automatic storage processes. Each storage process transmits the cur-

rent dataset to the interface at the same time.

Configuring the

automatic storage

function

1 Press the <STO> key shortly.

The menu for manual storage appears.

2 If necessary, change and confirm the ID number (1 ... 10000)

with <><> and <MENU/ENTER>.

The dataset is stored. The meter switches to the measured

value display.

15.03.2014 11:24:16

pH 7.000 24.8 °C AR +++

ID number: 1

continue

Manual data storage 4 From 500

15.03.2014 08:00

1 Press the <STO_> key.

The menu for automatic storage appears.

Xylem wtw Multi 3410 User Manual

Questions and Answers: