Xylem wtw Multi 3410 - Page 27

Operation Multi 3410
27
ba75863y18 01/2015
Menus and dialogs The menus for settings and dialogs in procedures contain further sub-
menus. The selection is made with the <><> keys. The current
selection is displayed with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with <MENU/ENTER>.
Example:
 Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with <MENU/
ENTER>. Subsequently, the setting can be changed with <><>
and <MENU/ENTER>. Example:
 Functions
Functions are designated by the name of the function. They are
immediately carried out by confirming with <MENU/ENTER>.
Example: Display the Calibration record function.
General
Interface
Clock function
Service information
Reset
System
15.03.2014 08:00
Language: Deutsch
Acoustic signal: off
Volume 9
Illumination: on
Brightness: 12
Switchoff time: 1 h
Temperature unit: °C
Stability control: on
General
15.03.2014 08:00