Xylem wtw Multi 3410 - Page 8

Multi 3410 Overview
8
ba75863y18 01/2015
The key symbol (e.g. <MENU/ENTER>) generally indicates a short
keystroke (under 2 sec) in this operating manual. A long keystroke
(approx. 2 sec) is indicated by the underscore behind the key symbol
(e.g. <MENU/ENTER
_>).
<F1>:
<F2>:
Softkeys providing situation dependent functions, e.g.:
<F1>/[Info]: View information on a sensor
<On/Off>:
<On/Off
_>:
Switches the meter on or off
<M>: Selects the measured parameter
<CAL>:
<CAL
_>:
Calls up the calibration procedure
Displays the calibration data
<AR> Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
<STO>:
<STO
_>:
Saves a measured value manually
Opens the menu for the automatic save function
<RCL>:
<RCL
_>:
Displays the manually stored measured values
Displays the automatically stored measured values
<><>:
<><>:
Menu control, navigation
<MENU/ENTER>:
<MENU/ENTER
_>:
Opens the menu for measurement settings / Confirms
entries
Opens the menu for system settings
<PRT>
<PRT
_>
Outputs stored data to the interface
Outputs displayed data to the interface in intervals
<ESC>: Cancels an action
F1
F2
CAL
ARAR
MENU
ENTER
MENU
ENTER
PRT
ESC