Yaesu FT-2000D - (VFO-A) BAND Switch; (VFO-A) MHz Switch; GRP Switch; M CH Switch

Page 27FT-2000D OPERATING MANUAL
(
VFO-A
)
BAND Switch
Pressing this button allows you to select the Main
(VFO-A) operating band (Amateur bands) using the
[
SUB VFO-B
]
knob.
(
VFO-A
)
MHz Switch
Pressing this button allows you to tune the Main band
(VFO-A) frequency down or up in 1 MHz increments,
using the
[
SUB VFO-B
]
knob.
GRP Switch
Pressing this button allows you to select the memory
group using the
[
SUB VFO-B
]
knob.
M CH Switch
Pressing this button allows you to select the memory
channel using the
[
SUB VFO-B
]
knob.
(
VFO-B
)
BAND Switch
When the
[
A/B
]
button is pressed, and the Orange lamp
to the right of the
[
SUB VFO-B
]
knob lights up, press-
ing this button allows you to select the Sub (VFO-B)
operating band (Amateur bands) using the
[
SUB VFO-
B
]
knob.
FRONT PANEL CONTROLS & SWITCHES
(
VFO-B
)
MHz Switch
When the
[
A/B
]
button is pressed, and the Orange lamp
to the right of the
[
SUB VFO-B
]
knob lights up, press-
ing this button allows you to tune the Sub band (VFO-
B) frequency down or up in 1 MHz increments, using
the
[
SUB VFO-B
]
knob.
FAST Switch
When the
[
A/B
]
button is pushed, and the Orange lamp
to the right of the
[
SUB VFO-B
]
knob lights up, the
[
SUB VFO-B
]
knob will be controlling the Sub band
(VFO-B) frequency; pressing the
[
FAST
]
button will
change the tuning step to 100 Hz.
A/B Switch
The
[
A/B
]
button determines whether the actions of
the
[
SUB VFO-B
]
knob will be applied to the Main
band (VFO-A) or the Sub band (VFO-B).
Pressing this button once causes the Orange lamp to
the right of the
[
SUB VFO-B
]
knob to light up; in this
case, rotation of the
[
SUB VFO-B
]
knob affects op-
eration on the Sub band (VFO-B). Pressing the
[
A/B
]
button once more causes the Orange lamp to turn off;
in this instance, rotation of the
[
SUB VFO-B
]
knob
affects operations associated with the Main band (VFO-
A).