59
Set mode no. / item Description
Selectable options
(
Options in bold are the default settings
)
GM
* For details of the functions, refer to the GM Function Instruction Manual.
1 DP-ID LIST Displays the DP-ID list screen. –
2 RADIO ID CHECK Display the transceiver specific
number (ID). (Uneditable)
–
WIRES-X
* For details of the functions, refer to the WIRES-X Instruction Manual.
1 RPT/WIRES FREQ Set the frequency to be used for
Repeater/WIRES.
MANUAL / PRESET
2 SEARCH SETUP Set the WIRES ROOM selection
method.
HISTORY / ACTIVITY
3 EDIT CATEGORY TAG Edit category tags. C1 to C5
4 REMOVE ROOM/NODE Delete registered Category ROOMs. C1 to C5
5 DG-ID Set the DG-ID number for WIRES-X. 01 to 99 / AUTO
CONFIG
1 APO Set the length of time until the
transceiver turns OFF automatically.
OFF / 30 min to 12 hour
2 BCLO Turn on/off the busy channel lockout
function.
ON / OFF
3 BEEP Set the beep emitting function, and
set whether or not to emit the beep
sound when a band edge/CH1 is
encountered.
SELECT: KEY&SCAN / KEY / OFF
EDGE: ON / OFF
4 BEEP LEVEL Beep volume setting. HIGH / LOW
5 BUSY LED Turn the BUSY indicator ON or OFF. A BAND: ON / OFF
B BAND: ON / OFF
RADIO: ON / OFF
6 CLOCK TYPE Set the clock shift function. A / B
7 GPS LOG Set the GPS log recording time
interval.
OFF / 1sec / 2sec / 5sec / 10sec / 30sec /
60sec
8 HOME VFO Enable/disable VFO transmission in
Home Channel.
ENABLE / DISABLE
9 LOCK Configure the lock mode setting. KEY&DIAL / PTT / KEY&PTT / DIAL&PTT /
ALL / KEY / DIAL
10 MONI/T-CALL Select the function of the MONI/
T-CALL switch.
MONI / T-CALL*
* European / Asian version
11 TIMER Switch the timer between ON and
OFF.
POWER ON: 00:00 - 23:59
POWER OFF: 00:00 - 23:59
12 PASSWORD Input the password. OFF / ON : - - - -
13 PTT DELAY Set the PTT delay time. OFF / 20ms / 50ms / 100ms / 200ms
14 RPT ARS Turn the ARS function ON or OFF. ON / OFF
15 RPT SHIFT Set the repeater shift direction. SIMPLEX / -RPT / +RPT
16 RPT SHIFT FREQ Set the repeater shift width. 0.000MHz to 150.000MHz
17 SAVE RX Set the receive save time. OFF / 0.05sec (1:1) to 20.0sec (1:400)
18 STEP Set the channel step. AUTO / 5.0KHz / 6.25KHz / (8.33KHz) /
(9.0KHz) / 10.0KHz / 12.5KHz / 15.0KHz /
20.0KHz / 25.0KHz / 50.0KHz / 100KHz
19 DATE & TIME ADJ Set the built-in clock. -
20 TOT Set the timeout timer. OFF / 30sec - 3MIN - 10MIN
21 VFO MODE Select the frequency selection range
in the VFO mode.
ALL / BAND
22 DIAL KNOB CHANGE Swap the Dial and VOL knob
functions.
Upper knob: DIAL knob
Lower knob: VOL knob
To Next Page
Loading...
