Adjusting the EQ 65
01V—Owner’s Manual
For the Stereo Output
1. Press the [HOME] button.
2. Press the MASTER [SEL] button.
ST is the selected channel.
3. Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select EQ
bands, and the F and G controls to adjust the frequency and gain, respec-
tively.
If the EQ AUTO SCREEN option is turned on in the preferences (“Setting 01V Prefer-
ences” on page 203), the EQ page shown below appears, and the Home fader mode is
selected. This page can also be located using the [EQ/ATT] button.
The EQ can also be adjusted on this page by using the cursor buttons to select param-
eters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.
To Next Page
Loading...
