EasyManuals Logo

Yamaha DSP-AX1 User Manual

Yamaha DSP-AX1
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
76
Additional
Information
Digital Sound Field Parameter Descriptions
RC. ROOM SIZE (Rear Center Room Size)
Function .................... This parameter adjusts the apparent size of the rear center sound field.
Control Range ........... 0.1 - 2.0
Description ................ The larger the value, the more reflective the presence sound field walls become.
S. ROOM SIZE (Surround Room Size)
Function .................... This parameter adjusts the apparent size of the surround sound field.
Control Range ........... 0.1 - 2.0
Description ................ The larger the value, the larger the surround sound field becomes.
LIVENESS
Function .................... This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early
reflections decay.
Control Range ........... 0 - 10
Description ................ The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces
than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to as
“dead,” while a room with highly reflective surfaces is referred to as “live.” The LIVENESS parameter lets you
adjust the early reflection decay rate, and thus the “liveness” of the room.
Level
Time
Source Sound
Level
Time
Level
Time
Dead
Live
Source Sound
Small Reflected
Sound
Large
Reflected Sound
Small value = 0
Large value = 10
S. LIVENESS (Surround Liveness)
Function .................... This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
Control Range ........... 0 - 10
Description ................ The larger the value, the more reflective the surround sound field walls become.
RC. LIVENESS (Rear Center Liveness)
Function .................... This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.
Control Range ........... 0 - 10
Description ................ The larger the value, the more reflective the surround sound field walls become.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha DSP-AX1 and is the answer not in the manual?

Yamaha DSP-AX1 Specifications

General IconGeneral
TypeAV Amplifier
Video Connectionscomposite, S-Video
Weight24.5 kg
Total Harmonic Distortion0.015%
Signal to Noise Ratio100dB
Input Sensitivity/Impedance200mV/47k ohms
Speaker Load Impedance4-16 ohms
Frequency Response10Hz-100kHz (+0, -3dB)
Dimensions435 x 171 x 468.5 mm (W x H x D)

Related product manuals