Operation
57
3. Turn the main switch to “ ” (on) to
make sure that the digital electronic con-
trol-active indicator lights. The engine
can not be started when the digital elec-
tronic control-alert indicator lights.
4. Turn the main switch to “ ” (start),
and hold it for a maximum of 5 seconds.
NOTICE: Never turn the main switch
to “ ” (start) while the engine is
running. Do not keep the starter mo-
tor turning for more than 5 seconds. If
the starter motor is turned continu-
ously for more than 5 seconds, the
battery will be quickly discharged,
thus making it impossible to start the
engine. The starter can also be dam-
aged. If the engine will not start after
5 seconds of cranking, return the
main switch to “ ” (on), wait 10 sec-
onds, then crank the engine again.
[ECM00192]
6AW-9-25-1E0 57 ページ ２０１０年３月１６日 火曜日 午後５時４５分
To Next Page
Loading...
