Operation
58
When starting the engine using the
Start/Stop button, press the button to
start the engine. The indicator for the
starting engine will come on.
When starting the engine using the
Start/Stop button on the All Start/Stop
panel, press the button to start the all en-
gines.
● When the main switch is turned to “ ”
(start) with the clip removed from the en-
gine shut-off switch, the buzzer will sound.
● Except the single type, if the clip is not in-
stalled to the engine shut off switch, the
buzzer will sound when the Start/Stop but-
ton is pressed.
● Except the single type, if one of the en-
gines has started, it can be stopped by
pressing the Start/Stop button on the All
start/Stop panel.
EMU35923
Procedure for dual station models (main
station)
1. Place the control lever in “ ” (neutral).
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2. Turn the main switch “ ” (on) to make
sure that the digital electronic control-ac-
tive indicator lights. The engine can not
be started when the digital electronic
control-alert indicator lights.
6AW-9-25-1E0 58 ページ ２０１０年３月１６日 火曜日 午後５時４５分
To Next Page
Loading...
