M7CL Owner’s Manual
About the firmware version
16
You can view the firmware version number in the SETUP screen (→ p. 229).
You can also download the most recent firmware version from the website.
http://www.yamahaproaudio.com/downloads/
When you are using the M7CL-48ES along with the
SB168-ES, the SB168-ES firmware must be the following
version or higher:
SB168-ES unit firmware : V1.1
EtherSound module firmware : C16
For information on checking the version number and
updating the firmware, please refer to the “SB168-ES
Firmware Update Guide.”
The SB168-ES firmware can be updated from a computer
connected to the rear-panel NETWORK connector.
Information about the latest versions and firmware down-
loads are available on the Yamaha pro audio website
SB168-ES product page:
http://www.yamahaproaudio.com/products/
The EtherSound module firmware can be updated from a
computer connected to the EtherSound connector.
Information about the latest versions and firmware down-
loads are available at the AuviTran website:
http://www.auvitran.com/
About the firmware version
To Next Page
Loading...
