Yamaha NAVIGO - Page 101

95
11
WARNING
● Operatingthewheelchairwhentheanti-tipdeviceisremovedornotinthecorrectposition
may cause a rollover. Make sure you operate the wheelchair with the safety wheels facing
downwards.
● Onlyhavethesafetywheelsfacingupwardswhengoingoverbumpswiththeassistantop-
erations and other such situations.
● Makesureyoureturnthesafetywheelstothecorrectpositionaftergoingoverthebump.
● Aroadsurfacewithlargedepressionscancausearollover,evenifthesafetywheelsare
facing downwards. When going over bumps, also pay close attention to the condition of
the road surface.
● Eveniftheanti-tipdeviceisinthecorrectposition,thewheelchaircouldrolloverdueto
various factors, such as a bumpy road surface, holes, level differences, and slopes.
Carefully choose routes you use frequently to be sure they are not hazardous.
IncaseofNAVIGO16″
(1) Placing the safety wheels in an upward-facing position

Press in the lock pin on the underside with your
nger.

Turn the anti-tip device 180° while the lock pin is
pressed in.
(2) Placing the safety wheels in a downward-facing position

Press in the lock pin on the top side with your nger.

Turn the anti-tip device 180° while the lock pin is
pressed in.
Lock pin
Lock pin
Safety wheel