EasyManua.ls Logo

Yamaha NAVIGO - Sample Inspection Form

Yamaha NAVIGO
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
106
12
12. Maintenance, Daily Check, Periodic Inspection
It is recommended that the NAVIGO be inspected periodically at the dealer. (Inspection is fee-based)
To ensure long-term durability, we recommend that your perform regular inspections every 6 months after
initial use.
Sample Inspection Form
Inspection Item
Date of
Inspection
Inspection Area Checked
Corrective
Measure
1 Unit
Noise, jammed object
Tire air pressure (24″ model: 450 kPa, 4.5 kg/cm
2
, 16″ model: 350 kPa, 3.5 kg/cm
2
), wear,
cracks, loose valve, cap
Hand rim looseness, damage, harmful damage, burrs, sharp points, and so on
Spoke looseness, breakage
Torque stop tightening
Dust cover installation
Anti-tip device looseness, deformation, damage
Dirty terminals on battery seat
Clutch operation, clutch cable damage
Wire connection looseness, damage
2 Controller
Damage, deformation, looseness, harmful damage, burrs, sharp points, and so on
Power switch, speed selector switch operation
Rubber cap damage
Joystick operation, actually move the joystick and make sure that it operates correctly.
Wire routing, damage
3
Assistant controller
(optional)
Damage, looseness, harmful damage, burrs, sharp points, and so on
Power switch, speed adjustment dial operation
Rubber cap damage
Brake lever play, e󰀨ectiveness, squeal
Brake cable, wire routing, damage
Actually operate the controller and make sure that it operates correctly.

Table of Contents

Related product manuals