Yamaha NAVIGO - 7. Handling the Batteries and Chargers

53
6
6.3. After Assistant Operations are Finished
(1) Park the wheelchair on a at location.
(2) Turn o󰀨 the power switch.
(3) Apply the parking brakes.
(4) Set the left and right clutch levers in the power drive position.
(5) Have the user get o󰀨 the wheelchair.
(6) Disconnect the battery from the wheelchair.
Store the battery with the protective cap on it.
Power
switch
WARNING
● Afteryouaredonetravelinginassistantpowerdrivermode,besuretoturnthepowero󰀨.
If the power is on when the user get off the wheelchair, the body may hit against the
switches, causing it to start moving, and you or other people in your surrounding area may
get injured.
● Positionthewheelchairinalevelandstablelocationnexttoabedorchair.Ifyoupark
thewheelchaironanincline,theusermaylosebalanceandfallwhentryingtogeto󰀨the
wheelchair.
● Iftheusergetso󰀨thewheelchairwiththeleftandrightclutchleversinthemanualposition
andwiththeparkingbrakesreleased,thewheelchairmaymoveunexpectedly,causingthe
usertofallo󰀨andbeinjured.Whengettingo󰀨thewheelchair,makesurethattheleftand
right clutch levers are in the power drive position and the parking brakes are applied.
WARNING
● Besuretostorethedisconnectedbatterywiththepro-
tectivecaponit.Exposedcontactscancauseshort
circuitsandleadtoareorbatteryrupture.
Protective cap