EasyManua.ls Logo

Yamaha NAVIGO - Page 83

Yamaha NAVIGO
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
9
After charging has completed, unplug the char-
ger plug and the power plug, then securely
close the battery’s connector cover.
Charger plug
Connector cover
Power plug
NOTICE
● Donotpullonthepowercord.Thiscancausethewirestobreak.
(3) Charging the battery attached to the wheelchair (on-vehicle charging)
Prepare for charging.
Remove any bags and luggage from the backrest, and anything else that can potentially tangle
the charge cable.
Park the wheelchair indoor on a level oor, and apply the parking brakes.
Turn o󰀨 the power switch on the wheelchair.
As a safety measure, during on-vehicle
charging, the wheelchair will not power on even
if it is switched on.
Insert the power plug of the dedicated charger
(ESC3) into the residential power outlet.
Open the connector cover, and insert the char-
ger plug into the charge connector on the bat-
tery.
Residential power outlet
Connector cover
Charger plug
Power plug

Table of Contents

Related product manuals