Yamaha NMAX - Instrument and Control Functions; Main switch;steering lock

12
4
4-1
TIP
TIP
WARNING
ON
OFF
LOCK
1.Push.
2.Turn.
Instrument and control functions
Main switch/steering lock
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
main switch positions are described
below.
The main switch/steering lock is
equipped with a keyhole shutter. (See
page 4-2 for keyhole shutter opening
and closing procedures.)
ON
All electrical circuits are supplied with
power; the meter lighting, taillight and
auxiliary lights come on, and the engine
can be started. The key cannot be
removed.
The headlight comes on automatically
when the engine is started and stays on
until the key is turned to “OFF”, even if
the engine stalls.
OFF
All electrical systems are off. The key
can be removed.
Never turn the key to “OFF” or “LOCK”
while the vehicle is moving. Otherwise
the electrical systems will be switched
off, which may result in loss of control
or an accident.
LOCK
The steering is locked and all electrical
systems are off. The key can be
removed.
To lock the steering
Turn the handlebars all the way to the
left.
With the key in the “OFF” position,
push the key in and turn it to “LOCK”.
Remove the key.
1.
2.
3.