7
7-33
Periodic maintenance and adjustment
1. Turn signal light bulb socket
1. Turn signal light bulb
1. Grab bar
2. Bolt
Replacing a front turn signal light
bulb
Place the vehicle on the center-
stand.
Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
Remove the burnt-out bulb by
pulling it out.
Insert a new bulb into the socket.
Install the socket (together with the
bulb) by turning it clockwise.
Replacing a rear turn signal light
bulb
Open the seat. (See page 4-14.)
Remove the grab bar by removing
the bolts.
Remove the tail light cover by re-
moving the screws.
1.
2.
3.
4.
5.
1.
2.
3.
To Next Page
Loading...
