Yamaha NMAX - Storage

8
8-3
Scooter care and storage
WARNING
Short-term
duced discoloring of stainless-steel
exhaust systems can be removed
through polishing.)
To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray on all metal, including
chrome-and nickel-plated, surfaces.
Use spray oil as a universal cleaner
to remove any remaining dirt.
Touch up minor paint damage
caused by stones, etc.
Wax all painted surfaces.
Let the scooter dry completely be-
fore storing or covering it.
Contaminants on the brakes or tires
can cause loss of control.
Make sure that there is no oil or
wax on the brakes or tires. If
necessary, clean the brake discs
and brake linings with a regular
brake disc cleaner or acetone,
and wash the tires with warm
water and a mild detergent.
Before operating the scooter test
its braking performance and cor-
nering behavior.
Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.
Never apply oil or wax to any
rubber parts, plastic parts or
headlight, taillight and meter
lenses, but treat them with a
suitable care product.
Avoid using abrasive polishing
compounds as they will wear
away the paint.
Consult a Yamaha dealer for ad-
vice on what products to use.
Washing, rainy weather or humid
climates can cause the headlight
lens to fog. Turning the headlight
on for a short period of time will
help remove the moisture from the
lens.
NOTICE
NOTICE
Storage
Always store your scooter in a cool, dry
place and, if necessary, protect it
against dust with a porous cover. Be
sure the engine and the exhaust sys-
tem are cool before covering the
scooter.
Storing the scooter in a poorly
ventilated room or covering it
with a tarp, while it is still wet,
will allow water and humidity to
seep in and cause rust.
To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia) and
areas where strong chemicals
are stored.
Long-term
Before storing your scooter for several
months:
Follow all the instructions in the
“Care” section of this chapter.
1.