1
2
7
7-32
Periodic maintenance and adjustment
13. Close the seat.
1. Taillight unit
2. Side cover
1. Taillight bulb socket
1. Taillight bulb
Remove the taillight bulb socket
(together with the bulb) by turning it
counterclockwise.
Remove the burnt-out bulb by
pulling it out.
Insert a new bulb into the socket.
Install the socket (together with the
bulb) by turning it clockwise.
Place the taillight unit in the origi-
nal position, and then install the
screws and quick fasteners.
Install the taillight cover by install-
ing the screws.
Install the grab bar by installing the
bolts, and then tightening them to
the specified torque.
Tightening torque:
Grab bar bolt:
17 Nm (1.7 m·kgf, 12 ft·lbf)
6.
7.
8.
9.
10.
11.
12.
To Next Page
Loading...
