Need help?Do you have a question about the Yamaha O1V96 and is the answer not in the manual?
General| Aux Sends | 8 |
|---|---|
| Motorized Faders | Yes |
| Computer Connectivity | USB |
| USB | Yes |
| Sampling Rate | 96 kHz |
| Bit Depth | 24-bit |
| A/D and D/A Converters | 24-bit |
| Type | Digital |
| Input Channels | 16 |
| Outputs - Main | 2 |
| Outputs - Other | 8 |
| EQ Bands | 4-band Parametric |
| Effects | Built-in effects processing |
| MIDI I/O | In/Out |
| Digital I/O | ADAT, AES/EBU |
| Faders | 17 |
| Power Supply | AC |
| Input Connectors | XLR, 1/4" TRS, RCA |
| Output Connectors | XLR, TRS |
Explains the layout and functions of the main control surface components.
Details the I/O ports and connectors located on the rear panel of the unit.
Illustrates typical setups for analog, hard disk recorder, and DAW systems.
Describes how to patch (assign) signal paths within the 01V96 to its inputs, outputs, and slot channels.
Introduces the parameters and signal flow for Input Channels 1-32 and ST IN Channels.
Details how to adjust phase, delay, gating, compression, and EQ for input channels via the display.
Describes the four internal multi-effects processors and their capabilities.
Explains how to use effects processors by patching inputs to Aux Outs and outputs to ST IN Channels.
Explains what settings are stored in a Scene and the concept of Scene numbers.
Provides steps for saving current settings as a Scene and recalling existing Scenes.
Explains the Remote function for controlling external DAWs and MIDI devices.
Details assigning 01V96 parameters to MIDI Control Changes for real-time control.
To Next Page
