180 PSR-A3000 Owner’s Manual
Using the Registration Sequence
1 Select the desired Registration Bank.
2 At the upper right of the Main display, confirm the Registration Sequence.
3 Press the TAB [E] or [F] button, or press the Foot Pedal to select the first Registration
Memory number.
The box appears around the left-most number, indicating that this Registration Memory number is currently
selected.
4 Use the TAB buttons or Foot Pedal during your keyboard performance.
To return to the status in which no Registration Memory number is selected, press the TAB [E] and [F]
buttons simultaneously while the Main display is called up.
NOTE The pedal can be used for Registration Sequence no matter which display is called up (except for the REGIST SEQUENCE display).
To Next Page
Loading...
