o.
Cylinder
1.
Cylinder head gasket
5.
Cylinder
2. Dowelpin
6. a-ring
3. Rubber
seal
7. Cylinder gasket
4.
Dowelpin
1.
Install the cam chain guide
to
the
crankcase.
2. Install the new O-ring and cylinder
base
gasket.
1. a-ring
3. Offset the three ring end gaps
as
shown.
3-37
1.
Top
3.
2nd
2.
Oil
ring (Lower rail)
4.
Oil
ring (Upper rail)
4.
Install the cylinder with one hand while
compressing piston rings with other
hand.
t
•
5. Install the cam chain with a wire in-
stalled.
6.
Install the guide stopper and tighten
the
securing bolts.
TIGHTENING TORQUE:
8 Nm (0.8
m·
kg, 5.8
ft
·Ib)
L
To Next Page
Loading...
