DANGER
WORKING UNDER THE MACHINE
Before performing service or repairs underneath the
machine, place the implement on the ground in its
lowest position.
Be sure to apply blocks to the tracks to lock the tracks
securely.
Never perform service underneath the machine if it is
not completely stable.
DANGER
RADIATOR COOLING WATER LEVEL
Before checking the radiator cooling water level, stop
the engine and wait until the engine and the radiator
have cooled down.
Slowly loosen the cap to release the inner pressure
before removing the cap.
WARNING
BE CAREFUL OF HOT OIL UNDER HIGH-PRESSURE
Hydraulic fluid escaping under pressure can have
sufficient force to penetrate the skin and do serious
damage and that immediate medical assistance be
sought.
The hydraulic system for the implement operates under
high pressure.
When replenishing or draining hydraulic oil, be sure to
first relieve the high pressure.
The emission of hot oil under high-pressure from a small
leak could result in serious bodily injury.
Wear safety goggles and thick gloves when checking for
leaks. Use a piece of cardboard or a plywood block to
detect emissions of hot oil.
If the hot oil should contact your body, obtain prompt
medical treatment.
To Next Page
Loading...
Need help?
General
